Unno Mith Race E-MTB M2S Motor

€11,665

In stock at 1 shop in Dublin

Sizes in stock
S1
Buy at The Bike Rack

Prices and stock checked Oct 22.

Where to buy

1 shop
The Bike RackUnit 9, Hills Hire Centre, Johnstown Road, Glenageary, Co. Dublin A96 RX66 · Dublin · Directions
Sizes S1
€11,665
View

About this bike

The Worlds Leanest e-MTB Frame Equipped WITH AN 800Wh Battery

The new MITH looks and rides like nothing else you have previously experienced.

Dji Avinox
The Most Powerful Drive System Available

130Nm in normal mode and 150Nm in Boost. Drive unit 2,52kg and 800Wh battery 3,74kg. Battery charged in 2:25h with fast charger. 2 inch OLED tactile display. Ambient light sensor. GPS, IMU, barometer, compass. Torque/cadence/wheel speed sensor. 4G connection with real-time bike location. Security and alarm system. Seamless integration with DJI products.

Show full description and specs

Twill Carbon Weave Finish

The unique UNNO look is back on our Factory & Pro builds. The twill fabric finish is not only cosmetic but add sextra impact resistance. Additionally, our MITH frames are tested up to 2x the ISO norm, making us very confident to offer a lifetime warranty on any frame.

Seat Post Insertion

We've shortened the seat tube and increased the insertion by 60mm while keeping our disruptive and unique frame design.

Now, the MITH comes with 150mm dropper posts in S1, 180mm in S2, and 210mm in S3.

Accessible Shock And Coil Compatible

The shock is now easily accessible for making setting adjustments and hassle-free maintenance, and the frame is compatible with coil shocks, too.

Protection

All bearings are shield from mud, dirt, and water, enhancing their durability.

NO Headset Cable Routing

We’ve ditched the trend of routing cables through the headset, gaining durability and ease of service. Additionally, the routing is now fully guided for a noiseless riding experience.

Virtual Pivot

Suspension
Refined

The suspension kinematics use an initial 30% of the curve with a higher progressive ratio for maximum small bump sensitivity, while the other 70% is less progressive to give enough platform to push the bike in

Corners and provide good bottom-out resistance.

SAG setup

We propose 2 different SAG settings: 30% for a standard setup or 35% for an aggressive setup, especially on steeper trails.

When using 35%, the bike is 0.5º slacker.

More Upgrades And New Features

Specifications

Description from The Bike Rack.